3040000048457
SHAFT,SHOULDERED
Part No.:
11691369,
NSN Summary
| NSN |
Description |
Assign |
Criticality |
Status |
Codification Country |
| 3040000048457 |
SHAFT,SHOULDERED |
06/07/1972 |
X |
Active
|
|
Open Solicitations
| Issued |
Closing |
Solicitation |
Clin |
Cage |
ECV |
Status |
Request A Demo
Request a Demo to see all details.
Manufacturers
| Part Number |
Company |
Cage |
P/N added |
P/N deleted |
RNVC |
RNCC |
RNAAC |
RNFC |
SADC |
DAC |
Item Status |
| 11691369 |
######### |
######### |
######### |
######### |
######### |
######### |
######### |
######### |
######### |
######### |
######### |
Request A Demo
Request a Demo to see all details.
Procurement History
| Company |
Cage |
Award Date |
Qty |
Unit Price |
Total Price |
Contract |
Delivery |
Request A Demo
Request a Demo to see all details.
Management Data
| MOE |
SOS |
AAC |
Unit Pack |
UOM |
Unit Price |
SLC |
Date ELA |
FCS |
MCC |
Technical Info
| Name |
Value |
| STEP QUANTITY |
2 |
| LARGEST STEP DIAMETER |
0.5695 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758 MIL SPEC ALL MATERIAL RESPONSES |
| MATERIAL |
STEEL |
| SURFACE FINISH |
32.0 MICROINCHES |
| FIRST END STYLE |
PLAIN |
| OVERALL LENGTH |
4.610 INCHES NOMINAL |
| END SIMILARITY |
IDENTICAL |
| FIRST END DIAMETER |
0.4726 INCHES NOMINAL |
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
FIIG Inc Info
| FIIG |
INC |
Description |
Detail |
| 22914 |
22914 |
SHAFT,SHOULDERED |
|
MOE Data
| Country |
MOE |
AMC |
AMSC |
NIMSC |
Eff Date |
IMC |
IMCA |
DSOR |
Collaborator |
Receiver |
AAC |
FMOE |
|
ZW01 |
|
|
|
11/01/2005 |
|
|
|
|
|
|
|
|
YB01 |
|
|
|
05/01/1997 |
|
|
|
|
|
|
|
Freight Data
| Integrity |
Originating |
HMC |
WCC |
TCC |
SHC |
ADC |
ACC |
ASH |
LTL |
NMFC |
NMFC Sub Item |
UFC |
Freight Description |
Rail Variance |
|
BF |
|
590 |
Z |
9 |
A |
B |
Z |
Q |
126900 |
B |
65750 |
POWER TRANS SHAFTING/SHAFTS S |
|
Packaging Data
| Source |
PICA / SICA |
Packaging Category |
Storage |
Preservation |
Clean/Dry |
INT Qty |
Unit Weight |
Unit Size |
Unit Pack Cube |
Item Weight |
Item Dims |
| A |
P |
ZZZZ |
B |
ZZ |
Z |
|
0.5 lbs |
4.8in x 3in x 0.7in |
0.005 cu ft |
|
|
| Preservation Material |
Wrapping Material |
Cushioning / Dunnage |
Cushioning Thickness |
Unit Container |
Intermediate Container |
UCL |
Special Marking |
Level A Packing |
Level B Packing |
Minimal Packing |
Optional Procedure |
| ZZ |
ZZ |
ZZ |
Z |
ZZ |
ZZ |
|
|
|
|
|
|
Item Standardization
| Status Code |
Originator |
Date |
Status |
| Not Standardized yet |
98 |
02/01/1975 |
Active |